Linux version 2.6.17 (root@Knoppix) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #4 SMP PREEMPT Wed May 10 13:53:45 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f690000 (usable) BIOS-e820: 000000003f690000 - 000000003f69c000 (ACPI data) BIOS-e820: 000000003f69c000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f76d0 On node 0 totalpages: 259728 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 30352 pages, LIFO batch:7 DMI present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: Napa ERB APIC at: 0xFEE00000 Processor #0 6:14 APIC version 20 I/O APIC #1 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists Kernel command line: ramdisk_size=100000 init=/etc/init lang=da keyboard=dk tz=Europe/Copenhagen apm=power-off vga=791 initrd=minirt.gz nomce quiet desktop=icewm BOOT_IMAGE=knoppix BOOT_IMAGE=linux acpi=off lang=da mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1666.998 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1024840k/1038912k available (2225k kernel code, 13388k reserved, 807k data, 324k init, 121408k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3340.80 BogoMIPS (lpj=6681604) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00000000 00000000 00000140 0000c1a9 00000000 00000000 Checking 'hlt' instruction... OK. Checking for popad bug... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed CPU0: Intel Genuine Intel(R) CPU T1300 @ 1.66GHz stepping 08 Total of 1 processors activated (3340.80 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs migration_cost=0 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 729k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd704, last bus=11 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f76f0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbc37, dseg 0x400 PnPBIOS: 25 nodes reported by PnP BIOS; 25 recorded by driver SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently PCI: Discovered peer bus 01 PCI: Discovered peer bus 05 PCI: Discovered peer bus 06 PCI: Discovered peer bus 07 PCI: Discovered peer bus 08 PCI: Discovered peer bus 09 PCI: Using IRQ router PIIX/ICH [8086/27b9] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 22 PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1c.2[C] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19 PCI: using PPB 0000:00:1c.1[A] to get irq 17 PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.0[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.1[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.2[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:04.3[A] -> IRQ 17 PCI->APIC IRQ transform: 0000:0a:08.0[A] -> IRQ 20 pnp: 00:0b: ioport range 0xfe00-0xfe01 has been reserved pnp: 00:16: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:16: ioport range 0x1000-0x105f has been reserved pnp: 00:16: ioport range 0x1060-0x107f has been reserved pnp: 00:16: ioport range 0x1180-0x11bf has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: b0200000-b02fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 11, cardbus bridge: 0000:0a:04.0 IO window: 00002400-000024ff IO window: 00002800-000028ff PREFETCH window: 50000000-51ffffff MEM window: 52000000-53ffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: b0300000-b03fffff PREFETCH window: 50000000-51ffffff PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Enabling device 0000:00:1e.0 (0004 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Enabling device 0000:0a:04.0 (0000 -> 0003) PCI: Setting latency timer of device 0000:0a:04.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1157471667.492:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata: 0x170 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 ata1: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6023 85:7469 86:3d09 87:6023 88:203f ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: TOSHIBA MK8032GS Rev: AS11 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 sd 0:0:0:0: Attached scsi disk sda PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 1 Cannot allocate resource for EISA slot 2 EISA: Detected 0 cards. NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI No-Shortcut mode RAMDISK: Compressed image found at block 0 input: AT Translated Set 2 keyboard as /class/input/input0 VFS: Mounted root (ext2 filesystem). Failed initialization of WD-7000 SCSI card! usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0004000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite P100 detected, limiting rate to 40pps. ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. input: SynPS/2 Synaptics TouchPad as /class/input/input1 ieee1394: Initialized config rom entry `ip1394' PCI: Enabling device 0000:0a:04.1 (0000 -> 0002) PCI: Setting latency timer of device 0000:0a:04.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[b0305000-b03057ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00008ed296] Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cloop: Initializing cloop v2.04 cloop: loaded (max 8 devices) cloop: /cdrom/KNOPPIX/KNOPPIX: 29945 blocks, 65536 bytes/block, largest block is 65562 bytes. ISO 9660 Extensions: RRIP_1991A Registering unionfs 20060221-0341 Freeing unused kernel memory: 324k freed apm: BIOS not found. Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31] Yenta: ISA IRQ mask 0x0678, PCI irq 17 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff cs: IO port probe 0x2000-0x2fff: clean. pcmcia: parent PCI bridge Memory window: 0xb0300000 - 0xb03fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0x800-0x80f: clean. cs: IO port probe 0x100-0x4ff: excluding 0x3f0-0x3f7 cs: IO port probe 0xa00-0xaff: clean. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Linux agpgart interface v0.101 (c) Dave Jones PCI: Setting latency timer of device 0000:00:1b.0 to 64 sdhci: Secure Digital Host Controller Interface driver, 0.11 sdhci: Copyright(c) Pierre Ossman eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation PCI: Enabling device 0000:0a:04.3 (0000 -> 0002) PCI: Setting latency timer of device 0000:0a:04.3 to 64 mmc0: SDHCI at 0xb0305800 irq 17 DMA agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 PCI: Setting latency timer of device 0000:0a:08.0 to 64 e100: eth1: e100_probe: addr 0xb0307000, irq 20, MAC addr 00:16:36:41:10:E4 ts: Compaq touchscreen protocol output hw_random: cannot enable RNG, aborting fuse init (API version 7.6) hw_random: cannot enable RNG, aborting device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com NET: Registered protocol family 17 lp: driver loaded but no devices found ppdev: user-space parallel port driver NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready IPv6 over IPv4 tunneling driver usb 1-4: new high speed USB device using ehci_hcd and address 2 usb 1-4: configuration #1 chosen from 1 choice scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Vendor: USB Model: Flash Disk Rev: 3000 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 2030592 512-byte hdwr sectors (1040 MB) sdb: Write Protect is off sdb: Mode Sense: 43 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 2030592 512-byte hdwr sectors (1040 MB) sdb: Write Protect is off sdb: Mode Sense: 43 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 1:0:0:0: Attached scsi removable disk sdb usb-storage: device scan complete